Compliance Guide
Lash Adhesive Compliance Checklist: The Documents Buyers Actually Ask For
Direct answer: a private-label lash adhesive comes with a paper trail or it is not ready for retail. The seven documents below are the ones buyers ask for — one US buyer sent us a fifteen-item list — and the table says what each proves, who needs it, and what LashPlus provides today, in the exact regulatory wording.
Qingdao Hopeshair Cosmetics Co., Ltd · A private-label manufacturer's compliance guide
The checklist
Adhesive is the product in a lash range with the most regulation around it, because it is a cyanoacrylate that ships as a chemical and is sold as a cosmetic accessory. Ask for the file before samples; a supplier who cannot name these documents will not produce them after the order either.
| Document | What it proves | Who asks for it | What LashPlus provides |
|---|---|---|---|
| SDS / MSDS (safety data sheet) | Hazard, handling, storage and transport data for the adhesive. | Every market; carriers and customs ask for it on cyanoacrylate products. | Supplied with the quote for your market — confirm when you request samples. |
| COA (certificate of analysis) | Batch-level test results against the product specification. | US and EU retail buyers; anyone doing incoming inspection. | Batch documentation on request — every tray and bottle is QC'd before it ships. |
| Ingredient / INCI list | The full ingredient declaration you need for your own label and listings. | Marketplaces (Amazon and others), EU and UK retail, distributors. | Handled with the quote — state your market. |
| FDA facility registration + product listing | Tells the FDA who manufactures the product and which products are made there — the MoCRA requirement for a manufacturer. | US buyers and US marketplaces. | Facility registered; lash, adhesive and lash-shampoo products listed under it. Wording: registered / listed — never "approved". |
| CE-standard documentation | Evidence that the product is manufactured to CE standards for EU / UK retail expectations. | EU and UK buyers. | Products made to CE standards; CE documents on file for eyelash extensions (RoHS) and the practice head; adhesive documentation on request. |
| Independent lab test reports | Third-party testing — heavy metals, microbial panel and similar. | Retail chains, distributors, compliance teams. | Eyelash extensions tested by SGS against California Proposition 65 (lead) and FDA 21 CFR (total mercury) — both Not Detected — plus a full microbial panel. Reports on request. |
| Supply Chain Statement | One page: fiber origin, production site, processing sequence. | Buyers who need traceability for their own compliance file. | Sent with quotes and samples. |
Column four repeats what is stated on the certifications page; nothing here goes beyond it.
Wording that tells you whether a supplier is honest
- "FDA registered" and "listed" are real. A facility registers with the FDA and lists its products under that registration; that is the MoCRA requirement for a manufacturer. "FDA approved", "FDA certified" and "FDA cleared" are not — the FDA does not approve cosmetics. A supplier using those words on adhesive is overstating.
- "Made to CE standards" is a claim about manufacturing and documentation; ask which CE documents are on file and for which product.
- A lab report has a laboratory name, a test standard and a result (for example: Proposition 65 lead — Not Detected). A "certificate" with none of those is a graphic.
- "Compliant everywhere" is not a thing. Ask for the documents that match your market, and expect the supplier to ask which market you sell in.
By market
- United States: FDA facility registration and product listing under it (MoCRA), SDS, COA, ingredient list; US marketplaces add their own listing requirements.
- EU and UK: CE-standard documentation, SDS, ingredient (INCI) list for your label, lab test reports for retail chains.
- Distributors and chains anywhere: the full file plus a supply-chain statement — fiber origin, production site, processing sequence — for their compliance team.
Tell us the market when you ask for a quote; the documents that go with the run are confirmed with it.
Documents by product and destination
Treat each liquid as its own line item. The table separates what this site already states from what must be confirmed with the destination-specific quote; it does not make a blanket compliance promise.
| Product | Intended use | Available documents | Destination review | Shipping quote |
|---|---|---|---|---|
| Professional lash adhesive | Professional extension bonding. | Facility registered and adhesive listed; SDS, batch documentation and ingredient information confirmed with the quote; lab reports on request. | State destination and sales channel; confirm local file and label requirements. | Quoted for destination, quantity and packaging. |
| Cream / gel remover | Dissolves cured adhesive for professional removal and refills. | Not stated publicly for this product; confirm available INCI and safety documents with the quote. | State destination, intended professional use and packaging. | Quoted for destination, quantity and packaging. |
| Lash shampoo / cleanser | Studio prep and retail aftercare cleanser. | Facility registered and lash-shampoo product listed; confirm remaining ingredient and safety documents with the quote. | State destination, studio or retail use, and label plan. | Quoted for destination, quantity and packaging. |
FAQ
What documentation should a lash adhesive supplier provide?
Direct answer: at minimum a safety data sheet (SDS/MSDS) for shipping and handling, a certificate of analysis (COA) for the batch you receive, an ingredient (INCI) list for your own labelling, and proof of the regulatory status in your market — in the US, the manufacturer's FDA facility registration and the product listing under it. Independent lab test reports and a supply-chain statement complete the file. Ask for the list before samples, not after the first order — what LashPlus holds is on the LashPlus certifications page.
Is a LashPlus private-label adhesive compliant with US MoCRA / FDA requirements?
Direct answer: the LashPlus manufacturing facility is registered with the U.S. FDA and the lash, adhesive and lash-shampoo products are listed under that registration, which is what MoCRA requires of a manufacturer. That is stated as "registered" and "listed" — the FDA does not "approve" or "certify" cosmetics, so any supplier using those words is overstating (how to read such claims: verifying a lash manufacturer). Further registration and standards documentation is available on request.
Do you provide a full ingredient (INCI) list for private-label adhesive?
Direct answer: ingredient documentation for a LashPlus private-label adhesive is handled with the quote — tell us the market you sell in and we confirm which documents are supplied with the run. Laboratory test reports are available on request, and a one-page LashPlus Supply Chain Statement is sent with quotes and samples; the adhesive ships with your LashPlus lash supplies.
What information is needed before assessing local requirements?
Direct answer: name the product, its intended use, the destination market, the sales channel and the packaging or label you plan to use. LashPlus then confirms which ingredient and safety documents are available with the quote; local registration, labelling and marketplace requirements must be assessed for that destination rather than assumed from another market.
Why should adhesive, bond & seal, remover and lash shampoo be quoted separately?
Direct answer: they have different intended uses, formulas, packaging and documentation needs. Separate line items let the ingredient file, available safety documents, destination review and shipping quote be confirmed for each product instead of treating every liquid as one compliance case.
Need the file for your market?
Tell us where you sell — we confirm the documents with your quote.
Adhesive ships alongside your trays from one FDA-registered facility; samples first, paperwork with the quote.
WhatsApp +86 136 5869 6865 · [email protected]
